Corrosion Inhibitor to Control Corrosion in Oil Production |
| Product Use |
High film persistent, batch Type corrosion inhibitor designed to control corrosion in oil production systems. |
|
|
|
| Description |
RIM-102* is a Corrosion Inhibitor to control corrosion in oil production that is a unique blend of filming amines and surfactants in an aromatic base solvent. This product has limited solubility in oil and water. This inhibitor forms a very persistent corrosion inhibitor film on down hole equipment, flow linesand most other oil handling equipment This corrosion inhibitor will inhibit corrosion caused byoilfield brines, organic acids, carbon dioxide and hydrogen sulfide. |
|
|
|
| Typical Physical Properties |
Form @ 20°C (68°F) - Dark brown liquid
Density @ 20°C(68°F) -0.880.95kg/L
Flash Point TCC >7G\C.(50*F)
Solubility Oil: Dispersible
|
|
|
|
| Application Method |
This inhibitor should be batched into the crude oil production well, dispersed in water or clean hydrocarbon. The quantity of corrosion inhibitor required to control corrosion is dependent on the well depth, water cut and production. Circulation of the well may be Performetod displace the corrosion inhibitor to the bottom of the well.To treat crude oil flow lines and gas gathering lines, Such type of inhibitor should be dispersed in clearhydrocarbon (for example, diesel) at a ratio of 1 part of corrosion inhibitor to 1 to 8 parts of hydrocarbon. Ideally, the mixture should be displaced down the lines between pigs. |
|
|
|
Material
Compatibility |
304 SS Excellent
316 SS Excellent
Aluminum Excellent
Brass Excellent
Copper Excellent
Carbon Steel Excellent
PVC Severe Effect
Teflon Excellent
AES Severe Effect
Polyethylene Fair
Polypropylene Fair
Ryton Excellent
Viton Severe Effect
Nitrile/Buna N Severe Effect
Neoprene Severe Effect
Ethylene Propylene Severe Effect Seals
Seals
Fluorocarbon Excellent |
|
