Oilfield Chemicals · Corrosion Inhibitor
RIM-108
Water Soluble Corrosion Inhibitor - Film Forming Corrosion Inhibitor
A water soluble, film-forming corrosion inhibitor designed to give excellent corrosion protection in topside oil and gas production systems and in pipelines, with a low environmental impact.
- Water Soluble
- Low Environmental Impact
- Proven Offshore Worldwide
Description
RIM-108 is a water soluble corrosion inhibitor, film-forming product designed to give excellent corrosion protection in topside oil and gas production systems and in pipelines. This corrosion inhibitor has been designed to give a low level of environmental impact when compared to more commonly applied corrosion inhibitors. It has been widely used in several offshore fields in the North Sea, Middle East and Asia Pacific.
Typical Physical Properties
| Appearance | Clear, dark brown liquid |
| Density | 1.03 - 1.07 g/cm³ @ 20°C |
| Pour Point | < -10°C |
| Flash Point | > 100°C |
| pH, Concentrated Product | 3.5 - 4.5 |
| Solubility | Water soluble |
Applications
This water soluble corrosion inhibitor is effective against CO2 corrosion, as well as H2S corrosion. The product is water-soluble and will partition readily to the water phase. The environmental concerns that are associated with the use of some water-soluble corrosion inhibitors are not a concern for this product. This inhibitor has an extremely low marine toxicity, does not have a tendency to bioaccumulate, and is readily biodegradable. This product has shown good effectiveness in comparative tests performed both in our own laboratories and in third party evaluations.
Continuous treatment with 1 to 5 ppm of this inhibitor is recommended based upon the total liquid volume, if the water cut is below 5%. The recommended dosage is 20 to 50 ppm, based on water volume, if the water cut is above 5%. Optimization of treatment should be performed according to corrosion monitoring results.
Need more details on RIM-108?
Get in touch with our technical team for a datasheet, sample or dosing recommendation.